Have you ever seen

 
 

Home Page

About

Network-Fiberoptics

Home Management

Electricity

Automation

Information

References

 





   

About

Network-Fiberoptics

Home Management

Electricity

Automation

Information

References

 

Turkish

 
 
 
 

 

Web Design Eis Interactive - 2004

 
 

Demo

<< Back  1 . 2 . 3 . 4 . 5   Forward >>

Comfort to C-Bus Interface


Comfort can be integrated with Clipsal’s C-Bus by connecting the bus cable directly to the UCM/C-Bus. Comfort provides telecontrol, Internet control, intruder alarm, voice messaging, and a central controller for the C-Bus. CBUS switches can operate appliances linked to Comfort like air-conditioners and home entertainment equipment, and the security system.

Why connect C-BUS to Comfort?
The C-BUS is a distributed system consisting of sensors (switches, light sensors, motion sensors) and actuators (for lighting, dimming, fan, curtain/ blinds), with each device having its own intelligence and with a specific function. Comfort is a home controller which coordinates the activity of home appliances and equipment, acting as the “brains” for the home. For example, when an intruder alarm is activated, the lights in the immediate area can come on automatically, and when someone comes in the front door when the security system is armed, the hall lights can be switched on, or when the system is armed to Night mode, the lights can be dimmed for a few minutes and then switched off. This requires the intruder alarm system and the lighting system to work closely together. Comfort can switch lights through main-rated relays but it does not dim lighting directly, it works with lighting systems (X10, EIB, C-Bus, ,Lutron etc.) . Comfort complements the C-BUS system by providing a comprehensive telecontrol function with up to 300 functions, and the ability to send infrared signals to home entertainment and airconditioners. Through the Comfort Web Server Module, the CBUS system can be controlled from a local Area Network, or the Internet.

 


 
Comfort

 

 

C-Bus

UCM/C-Bus
The UCM/C-Bus connects Comfort to the C-BUS. The C-BUS bus is connected to a two-pin terminal block on the UCM/C-BUS. No additional equipment is required on the C-BUS side. This provides a two-way interface between Comfort and the C-BUS, i.e., Comfort is able to send as well as receive telegrams on the C-BUS. Signals on Comfort are isolated from the C-BUS by optical isolators.

UCM/EIB Technical Specifications

Comfort Brief Specifications


Size :
Max UCMs in Comfort :
Connection to Comfort :
Connection to C-Bus :
Current from Comfort :
Current from C-Bus :
Telegrams sent to C-Bus:
T.G. received from C-Bus:
Electrical Isolation :


108 x 88 mm
8
12V, Com, KA,/KB (RS485)
C-Bus ( 2 wires)
50 mA max
3 mA ??
Any C-Bus Group Address
Group Addresses 0 to 127
Comfort circuits are opto-isolated from C-Bus


Number of Inputs :
Number of Outputs :
Input Types :
Output drive :
Output Signals :
Alarm Types :
Time Programs :
Responses (Macros or pr.) :
Telecontrol :


8, expandable to 64
8, expandable to 64
Dry Contact, Digital 0V/5V
Open-collector
On/Off, Pulse, Infrared sig.
31
16
255
30 menus with 300 functions

 

Top

<< Back  1 . 2 . 3 . 4 . 5   Forward >>


       Technical Office: +90 216 390 87 96   Technical Office (Fax): +90 216 390 28 38 
http://www.cetinler.com.tr    cetinler@cetinler.com.tr
Yeni Mah. Sureyyapasa Cad. No: 47 34893 Pendik - Istanbul - Turkey